Table Size (W x L)

12″ x 58″

(305 x 1473 mm)

T-slot Width (3 Hardened & Ground T-Slots)

5/8″ with ground reference edges (15.9 mm wide)

Table Capacity

1,500 lbs

Table Load Maximum – for rated accuracy

440 lbs

(200 kgs)

Table Travel – X Axis (With or without Power Feed)

40.5″

(1,028 mm)

Cross Travel – Y Axis

15.75″

(400 mm)

Knee Travel – Z Axis

16″

(406 mm)

Ram Travel (Overarm) / Swivel

17.7″

(450 mm)

Spindle Nose-to-Table Surface Travel

2″ – 18″ 

(50 – 457 mm)

Quill Travel – Manual & Power Feed

5″

(127 mm)

Quill Feeds – With Trip Release – Inch

0.0015″  /  0.003″  /  0.006″   

Quill Feeds – With Trip Release – Metric

0.04 mm / 0.08 mm / 0.16 mm

Quill Diameter

4.13″

(105 mm)

Leadscrew ground pitch (X & Y)

0.2″ per rev.

Head Tilt (Left-to-Right)

90° – 0 – 90°

Head Tilt (Front-to-Back / Up-Down)

45° – 0 – 45°

Head Swivel

360°

Spindle Motor

5 HP  /  3 Phase  /  220 vac

Spindle Taper

NT #40-Taper

Spindle Runout

0.0002″ maximum runout (0.005 mm)

Spindle Bearings

ABEC-7 matched set of Class-7 bearings

Variable Speed Drive – Dual Range

80 – 520 RPM (low-range) / 600 – 4,000 RPM (high-range)

NOTE: 5,000 RPM Spindle available with optional
AC Inverter Spindle Head

Power Requirements 3-Phase Power

220 vac @ 26-amps

Machine Weight

3,740 lbs

(1700 kg)

Coolant Capacity

13.5 Gallons 

(51 liters)