Table Size (W x L)

12″ x 58″

(305 x 1,473 mm)

Table Travel with CNC Control

33.5″

(850 mm)

Travel Capacity

1,500 lbs

T-Slot Width (3 T-Slots)

5/8″ T-Slots with ground reference edges (15.9 mm wide)

Table Travel – X Axis

34″

Cross Travel – Y Axis

15″

Knee Travel

16″

(406 mm)

Ram Travel

17.7″

(450 mm)

Spindle Nose-to-Table Surface Travel

2″ – 18″

(50 – 457 mm)

Ballscrew ground pitch (X & Y)

200″ per rev           (5 mm)

Adjustable scale ring resolution

0.001″

(0.0254 mm)

Hardened & Grounded Meehanite^® Processed Cast Iron

Longitudinal Table – Z Axis

Hardened & Ground Dovetail Ways

Cross Slide to Knee – Y Axis

Hardened & Ground Square Box Ways

Knee to Column

Hardened & Ground Square Box Ways

Head Tilt (Left-to-Right)

90° – 0 – 90°

Head Tilt (Front-to-Back / Up-Down)

45° – 0 – 45°

Head Swivel

360°

Spindle Motor

5-HP  /  3 Phase  208 – 240 vac

Spindle Taper

NMTB #40 N.S. Taper

Drawbar Thread

5/8″ – 11

Spindle Runout

0.0002″ maximum runout (0.005 mm)

Spindle Bearings

Fafnir ABEC – 7 Matched set of Class-7 Bearings

Variable Speed Drive – Dual Range

80 – 520 RPM (low-range)  /  600 – 4,000 RPM (high-range)

Note: 5,000 RPM Electronic Variable-Speed Spindle
available with the optional AC Inverter Spindle Head

Quill Travel – CNC Z-Axis

5″  (127 mm) Manual & Power Feed w/o 3rd CNC Axis

Quill feeds (per rev) with Trip Release – Inch

0.0015″ / 0.003″ / 0.006″

Quill feeds (per rev) with Trip Release – Metric

0.04 mm / 0.08 mm / 0.16 mm

Quill Diameter

4.13″                          (105 mm)

Power Requirements 3-Phase

208 – 220 vac  ±5% @ 22 amps (440 vac optional)  /
110 vac 20-am dedicated service required for CNC Control

Coolant Capacity

11-Gallons

(41 liters)

Machine Weight

3,900 lbs