MANUAL LATHES
GHT-618 EVS
HIGH ACCURACY TOOLROOM LATHE
- 3 Horsepower Electronic Variable-Speed Inverter Motor
- 130 – 4000 RPM Infinitely Variable Spindle Speeds
- 11” Swing x 18” Between Centers
- Power Feeds in Both Cross and Longitudinal Axis
MACHINE SPECIFICATIONS
Table
With Round 5C Collets | 1-1/16″ | (27 mm) |
With Hex 5C Collets | 7/8″ | (22 mm) |
With Square 5C Collets | 3/4″ | (19 mm) |
With Expanding Collets | 3″ | (76 mm) |
With Step Chucks | 1-1/16″ – 6″ | (27 – 152.4 mm) |
With 3 & 4 Jaw Chucks | 6″ | (152 mm) |
MACHINE TRAVELS & CAPACITY
Swing over bed | 11″ | (280 mm) |
Swing over carriage | 9″ | (228.6 mm) |
Swing over cross slide | 6″ | (152.44 mm) |
Distance between centers | 18″ | (457 mm) |
Tailstock quill | MT#2 | |
Main Motor | 3 HP / 220 vac 3 phase 20 amps, or single phase 35-amp service (peak) | |
Coolant Pump | 1/8 HP / 220 vac 3 phase only (with coolant nozzle & flow control valve) |
MACHINE TRAVEL & SPECIFICATIONS
Cross Slide Travel | 6″ | (152 mm) |
Compound Slide Travel | 3″ | (76 mm) |
Quick Action Compound Slide Motion | 0.1″ | (2.5 mm) (eg. For thread pull out) |
Tailstock Quill Travel | 3-3/4″ | (95 mm) features inch & metric quill graduations |
Inch Threads (36) | 11 – 108 TPI | Threading gearbox selectable w/o change gears |
Metric Threads (36) | 0.275 – 2.7mm | Threading gearbox selectable w/o change gears |
Carriage Slide Powerfeed Range | 3/16″ – 4″ per minute | (8 – 178 mm) |
Cross Slide Powerfeed Range | 5⁄16” – 7″ per minute | (5 – 102 mm) |
Net Weight | 2,420 lbs | (1,098 kg) |
Machine Shipping Dimensions L x D x H | 74″ x 30″ x 66″ | (1,880 mm x 762 mm x 1,676 mm) |
More Machines
GHT-618 EVS
GTW-16
GTW-20
GTW-22
GTW-26
GTD-30
GTD-44HL
