CNC MILLS
GMV-3F CNC
10” X 54” CNC PLUS MILL
- Full Manual & CNC Capability
- Ideal for R&D Toolroom shops
- Easy to use CNC Control
- Precision Ball Screws
- Rugged Meehanite castings with high density cast iron
- Hardened & Ground Table ways
MACHINE SPECIFICATIONS
Table
Table Size (W x L) | 10″ X 54″ | (254 x 1,372 mm) |
T-Slot Width (3 T-Slots) | 5/8″ T-Slots with ground reference edges (15.9 mm) | |
Table Load Capacity (Evenly Distributed) | 950 lbs | (430 kgs) |
MACHINE TRAVELS & CAPACITY
Travel may be reduced by CNC limit switches | ||
Table Travel – X Axis (under CNC control) | 34.5″ | (875 mm) |
Cross Travel – Saddle / Y Axis | 16.3″ | (415 mm) |
Knee Travel –Z Axis | 15.75″ | (400 mm) |
Spindle Nose-to-Table Surface Travel | 2″ – 18″ | (50 – 457 mm) |
Quill Travel – CNC Z Axis | 5″ | (127 mm) (manual & Powerfeed travel w/o 3rd) |
Quill Feeds – With Trip Release – Inch | 0.0015″ / 0.003″ / 0.006″ | |
Quill Feeds – With Trip Release – Metric | 0.04 mm / 0.08 mm / 0.16 mm | |
Quill Diameter | 3 –3/8″ | (85.725 mm) |
Ballscrew ground pitch (X & Y) | 0.2″ per rev. | |
Adjustable scale ring resolution | 0.001″ | (5 mm) |
Ways – Hardened & Ground | Dovetail Ways in X-Axis |
SPINDLE HEAD
Spindle Motor | 3 HP |
Spindle Taper | R-8 #30 taper & #40 taper optional) |
Spindle Runout | 0.0002″ maximum runout (0.005 mm) |
Spindle Bearings | ABEC-7 matched set Class-7 bearings |
Head Tilt (Left-to-Right) | 90° – 0 – 90° |
Head Tilt (Front-to-Back / Up-Down) | 45° – 0 – 45° |
Head Swivel | 360° |
DIMENSIONS & WEIGHT
Power Requirements 3-Phase | 220 vac | 21 amps |
Machine Dimensions L x W x H | 65″ x 66″ x 87″ | |
Machine Weight | 3,482 lbs | (1,580 kgs) |
More Machines
GTW-1840
